Services Tips for The Average Joe

Services Tips for The Average Joe

Home Products & Services Comments Off

DIY Basement Waterproofing Tips If your basement foundation is poorly constructed, water seepage and condensation may occur when it rains. This is the last thing many homeowners will want to see, but you don’t need to panic when it happens. Waterproofing is one of the key solutions to reduce this kind of a mess within your basement. First, you require a strong and high-quality waterproof coat. Given the difficulties of preventing water seeping, the waterproofing will work well if the walls are well constructed. If the walls are not in the perfect condition, start by brushing the loose mortar as well as the broken blocks. Clear dirt, dust, grease, and any other contaminant using a wire brush. Use a quick-dry cement to shut the cracks or openings on the foundation wall. However, it is highly recommended to check the manufacturer’s guidelines before you start patching the cracks. The waterproofing is usually mixed with some concrete based on the degree of seepage. Ensure you use the recommended amount of waterproofing as indicated by the manufacturer. However, an excess of waterproof use may imply a stronger sealing to the cracks.
Study: My Understanding of Remodels
More importantly, avoid making a thin waterproof as it will not stop moisture leakage. For a higher seeping rate, it is advisable to add another coating. Don’t forget to work on the masonry directly. Make sure all cracks are sealed appropriately.
What You Should Know About Basements This Year
When you start shopping for moisture coating products, you need to be a bit careful to buy the right product. ‘Water repellant’ and ‘Waterproofing’ are two terms that many manufacturers use interchangeably. You should note that these are two different things. Water repellant is used to coat above the concrete and do not actually prevent water seepage under hydrostatic pressure. On the other hand, waterproofing coating is effective for stopping water seeping under hydrostatic pressure. They are specifically applied on and below concrete grade for both exterior and interior wall surfaces. Faulty guttering systems, high water table, wind-driven downpour, or surface runoff flowing towards a house are some of the major factors that cause the hydrostatic pressure. It is also imperative to differentiate between seepage and condensation. To know the cause of wetness on the foundation, place an aluminum foil on the wall and leave it for several days. If only the foil’s side lying on the wall is wet, water seepage might be the problem. If the wetness is on the upper side, there is a condensation problem. However, if both sides of the foil are wet, condensation and seepage are occurring at the same time. Therefore, a dehumidifier can be used to solve condensation problem while a good quality waterproofing coating can stop the seepage issues.

Author

Back to Top